GEK DRY DUMMY LOAD

                                                                                                                                     Page update as on 21/01/2022

Simulates a matched 50 Ohm antenna to test your transmitter

 

GEK-100W/250W/500W

 Dry Dummy Load

GEK Dry Dummy Load simulates an accurate 50 Ohm antenna up
to 2 GHz, enabling you to test your transmitter without radiating a signal on the air.

•  DC to 2 GHz.
•  VSWR of less than 1.3:1 at 2 GHz.
•  Duty Cycle: 10% .
•  20 sec ON with 200-400 seconds OFF period
•  Voltage Gradient: 10 kV per inch.
•  Resistor Type:

         Resistive Element: Thick film
         Substrate: Beryllium oxide ceramic
         Cover: Alumina ceramic
         Mounting Flange: Copper, nickel plated per

•  Energy Density: 7000 J / inch3 / second.
•  Compact and lightweight.
•  SIZE : 100mm(L) x 100mm(W) x 40mm(H)
•  Weight : 0.45Kgs app
•  Nickel Chromium Plated Encloser
  

100watts   Rs1800/- (INR)

250watts   Rs2100/- (INR)

500watts   Rs3800/- (INR)

 Shipment charges extra

A reasonable cool down period is needed to keep the
resistor from becoming permanently damaged. (Typically 10-20
times the load usage.)


Specification & Design Subject to Change without prior notice

Email:  vu3gek@gmail.com

                                                                                 Whatsapp/Telegram: +91-9363105352